TOX PRESSOTECHNIK
IT: +39 02 61039788

Mechanics & Sensors of the servo press drives

The intelligent servo press with precision mechanics

With TOX®-EdgeUnit, every TOX®-ElectricPowerDrive becomes an intelligent component within the network

  • Supply with 24 V
  • Internal fieldbus: EtherCAT
  • Status LED
  • Integrated memory for
    • maintenance counter, stroke counter
    • drive date, calibration factor

Extend the servo press without additional hardware with the components selected by you by means of comprehensive interfaces on the TOX®-ElectricPowerDrive:

  •  Additional force input 16 bit ADC (e.g. for external DMS)
  • 2 digital inputs / 2 digital outputs
  • 2 analog inputs (e.g. for external travel sensor, piezo force sensor)
  • Encoder input (e.g. for TTL measuring sensor)
     

INTEGRATED FORCE SENSOR

  • Integrated in the housing as standard (exception: EQe-K 002)
  • 4x DMS with <0.5 % measuring accuracy
  • Independent of room position, compensated in itself
  • Internally connected with the TOX®-EdgeUnit
  • Measuring amplifier and 16 bit ADC

to the accessory sensor overview

INTEGRATED POSITION MEASURING

  • Resolver integrated on the motor as standard (absolute encoder optional)
  • Resolver data are used for closed loop control of the motor
  • Calculation of the piston movement based on the resolver data
  • Theoretical position measuring up to 1.06 µm
  • Distance repeat accuracy of +/- 10 µm

The spindle makes the difference

BALL SCREW

  • Compact design and reasonably priced
  • Long service life

A typical application example is pressing.

PLANETARY THREADED SPINDLE

  • High power density, rigidity and very long service life
  • Very small design

Typical application examples are punching, press applications with high joining speeds or press applications in limited installation spaces.
 

Let us know your requirements - we will dimension the optimum drive system for you. We can optimize your solution with our versions:

  • Long holding time of the force
  • Reduced cooling time
  • Force pulling or punching process
  • Increased speed
  • And much more
     

Operating principle of the servo press

This content is blocked due to restrictions of your browser/firewall

Summary of servo press types

The reasonably priced servo drive EQe-K

  • Cost efficient
  • Stroke length: 150, 300, 450 mm
  • Press force: 0.02 – 100 kN
  • Ball screw
  • 4-point force measuring with high measuring accuracy
  • Force repeat accuracy: ≤ +/- 1.0%
  • Distance repeat accuracy: +/- 0.01 mm
     

The flexible servo press for every application: EXe-K

  • High power density with low weight
  • Stroke length: 150, 300, 450 mm
  • Press force: 10 - 200 kN
  • Planetary threaded spindle
  • Highly accurate 4-point force measuring
  • Accuracies: Force: ≤ +/- 0.5%
  • Distance repeat accuracy: +/- 0.01 mm
  • Low space requirement
  • Customized configuration possible
     

Extremely fast: EXe-F

  • Extremely fast and highly dynamic
  • Designed for permanent operation
  • Planetary threaded spindle
  • Highly accurate 4-point force measuring
  • Accuracies: Force: ≤ +/- 0.5%
  • Distance repeat accuracy: +/- 0.01 mm
  • Customized configuration possible

High force with compact dimensions: EXe-L

  • Compact and modular design
  • Accuracies: Force: ≤ +/- 0.5% (≤ +/- 1% with EPMK 1000)
  • Distance repeat accuracy: +/- 0.01 mm
  • Planetary threaded spindle
  • Force sensors attached to the housing Customized configuration possible
     

Applications

Clinciatura
La clinciatura è un processo di formatura a freddo che consente di fissare insieme lamiera e altri materiali senza la necessità di bulloni, rivetti o adesivi.
Per saperne di più
ClinciaturaClinciatura
Pressatura
Le TOX®-Tongs, le strutture per presse e le presse hanno innumerevoli campi di applicazione
Per saperne di più
PressaturaPressatura
Assemblaggio
Pressatura e montaggio di boccole e cuscinetti, produzione di assiemi precisi ad accoppiamento forzato
Per saperne di più
AssemblaggioAssemblaggio
Inserimento degli elementi di fissaggio
Soluzioni complete per l’inserimento degli elementi di fissaggio
Per saperne di più
InserimentoInserimento
Coniatura
È necessario identificare i prodotti? Oppure conservare un componente in modo sicuro per operazioni aggiuntive?
Per saperne di più
ConiaturaConiatura
Rivettatura
Offriamo prodotti standardizzati ma altamente flessibili per rivettatura, aggraffatura, svasatura...
Per saperne di più
RivettaturaRivettatura
Punzonatura
Non importa se si desidera lavorare lamiera, plastica, cartone, tessuti o lamine
Per saperne di più
PunzonaturaPunzonatura

Indirizzo

TOX® PRESSOTECHNIK S.r.l.
Via XXV Aprile 39
20091 Bresso
Telefono: +39 02 61039788
Fax: +39 02 6140555
Contatti
IT: +39 02 61039788 Modulo di contatto
 
Cookie Information

Per ottimizzare la navigazione nel nostro sito da parte degli utenti, utilizziamo dei cookie. È possibile impedire o regolare i cookie impostando il proprio browser.