Progetti di riferimento
The customer is producing aerosol cans.
The cans can only be pierced after a pressure test. The punches dive through the upper opening into the can and make the piercing at the bottom simultaneously. The approach – power stroke combination of the TOX®-Powerpackage provides the short cycle time at a total stroke of 300 mm. Additionally, 3 different types of cans can be pierced with 2 tool sets.
TOX®-C-Frame Press CMM 008
Drive: TOX®-Powerpackage S 008 with press force 80 kN (at 6 bar air pressure), total stroke 400 mm and power stroke 12 mm.
The cans are transported from a feeder to the indexing table which positions two pieces in the piercing tool.
Contatti IT: +39 02 61039788 Modulo di contatto |
Cookie Information Per ottimizzare la navigazione nel nostro sito da parte degli utenti, utilizziamo dei cookie. È possibile impedire o regolare i cookie impostando il proprio browser. |
![[Translate to Italy:] Punching a round hole into a can](/assets/countries/DE/images/55_15_aerosol-can.jpg "[Translate to Italy:] Punching a round hole into a can")
![[Translate to Italy:] TOX®-Press type CMM 008](/assets/countries/DE/images/55_15_CMM008.jpg "[Translate to Italy:] TOX®-Press type CMM 008")
![[Translate to Italy:] The punching tools](/assets/countries/DE/images/tia_55_15_CMM_detail.jpg "[Translate to Italy:] The punching tools")